Menu +

A/S
Home > 모니터 > LEM Series : Precision OLED Monitors > LEM-550R

LEM-550R

  • LEM-550R
  • LEM-550R
  • LEM-550R

   

LEM-550R

Audio Level Meter Display

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Blue Only / Mono

blue only

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

H/V Delay

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Marker

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Time Code Display

Time Code Display

Displays the Timecode information on the screen.

Waveform/Vector Scope

Waveform/VectorWaveform/Vector

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

3G-SDI Level A/B

Supports 3G-SDI Level A/B input.

LEM-550R : 55” UHD OLED Monitor for HDR Monitoring
The LEM-550R is QC-Grade HDR monitor for broadcast and post production with a 55-inch OLED panel with UHD resolution of 3840 × 2160. The OLED panel can reproduce a maximum luminance of up to 750 nits. The LEM-550R supports various HDR standards such as SMPTE 2084PQ, Hybrid-Log Gamma (HLG), and others. It also supports multiple color gamuts including Rec.709, DCI, and Rec.2020. Signal I/O includes 3G/6G/12G-SDI input via one, two, or four SDI connections as well as HDMI (ver.2.0).
Coming Soon!!!
Display Spec.
 Size  54.6"
 Resolution  3840 X 2160 (16 : 9)
 Pixe Pitch  0.315mm
 Color Depth  1.07B
 Viewing Angle  179°(H) / 179°(V)
 Luminance  HDRcd/m2
 Contrast Ratio  HDR140,000 : 1
 Display Area  1209(H) × 680(V) mm
Input
 4 X BNC  3G-SDI A/B/C/D Channel Input
 1 X HDMI  HDMI Input
Output
Audio
 Audio In  Embedded Audio/Analog Stereo (Phone Jack)
 Audio Out  Analog Stereo (Phone Jack), Internal Speaker(Mono)
FPGA Functions
,  Audio Level Meter Display,  H/V Delay,  Time Code Display
Closed Caption
Calibration
Other Functions
 Reference Sync input   EXT_Sync in
 REMOTE   GPI (RJ45)
 REMOTE   TVLogic’s specification
 USB   Firmware update by USB cable
 Ethernet   Ethernet Control support
 Conversion   SDI-to-SDI,
Options
  Carring Case,
LEM-550R : 55” UHD OLED Monitor for HDR Monitoring
LEM-550R : 55” UHD OLED Monitor for HDR Monitoring
  Pronduct Brochure (1 Page)    -
  Manual   Download
  Leaflet    -
  Total Brochure   Download