Menu +

Home > 모니터 > LUM Series : 4K/UHD Monitors > LUM-313G


  • LUM-313G
  • LUM-313G
  • LUM-313G


Audio Level Meter Display

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Blue Only / Mono

blue only

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

H/V Delay

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.



Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Time Code Display

Time Code Display

Displays the Timecode information on the screen.

User Aspect

User AspectUser AspectUser Aspect

Adjusts the Width /Height display ratio.

Various Scan Modes

Various Scan ModesVarious Scan ModesVarious Scan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector Scope


Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

LUM-313G : 12G-SDI 및 HDMI 2.0을 지원하는 31인치 True 4K 모니터
LUM-313G는 Native 4K 해상도(4096 × 2160)를 지원하는 31.1" 모니터로 최대 휘도 350nit, 명암비 1500:1, 넓은 색 영역 및 광시야각을 제공합니다. LUM-313G는 4개의 BNC(2×12G-SDI + 2×3G-SDI) 및 HDMI 2.0 인터페이스를 지원하며 싱글 링크 12G-SDI, 쿼드 3G-SDI 및 HDMI 2.0을 통해 최대 4K/60p의 다양한 비디오 포맷을 지원합니다. 또한 Waveform/ Vectorscope 와 같은 다양한 전문 기능을 제공하며 PQ, HLG, SLog3 등 HDR EOTF 표준을 지원하는 HDR 에뮬레이션 기능을 제공합니다.
Display Spec.
 Size  31.1"
 Resolution  4096 X 2160 (17:9)
 Pixe Pitch  0.1704mm
 Color Depth  1.07B
 Viewing Angle  178°(H) / 178°(V)
 Luminance  350cd/m2
 Contrast Ratio  1,500:1
 Display Area  698(H) x 368(V) mm
 4 X BNC  12G-SDI A/B Channel Input, 3G-SDI C/D Channel Input
 1 X HDMI  HDMI Input
 4 X BNC  HD SDI A/B/C/D Channel Output
 Audio Out  Analog Stereo (Phone Jack), Internal Speaker(Mono)
FPGA Functions
,  Blue Only,  H/V Delay,  Marker,  Mono,  User Aspect,  Various Scan Modes,  Waveform/Vector
Closed Caption
 TVLogic Color Calibration Utility, 3D LUT & Adjustable Gamma, 3rd Party 3D LUT Import
Other Functions
 REMOTE   TVLogic’s specification
 USB   Firmware update by USB cable   Firmware update by USB memory stick
 Conversion   SDI-to-SDI,
  Carring Case,
LUM-313G : 12G-SDI 및 HDMI 2.0을 지원하는 31인치 True 4K 모니터

LUM-313G : 12G-SDI 및 HDMI 2.0을 지원하는 31인치 True 4K 모니터
  Pronduct Brochure (1 Page)   Download
  Manual   Download
  Leaflet    -
  Total Brochure   Download