Menu +

Home > 모니터 > LQM Series : Quad-split Monitors > TDM-473W


  • TDM-473W


Audio Level Meter Display

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Closed caption

Closed caption

Closed caption.

Blue Only / Mono

blue only

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Focus Assist

Focus AssistFocus Assist

Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

H/V Delay

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Key Lock

Locks the knob or key control.



Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Range Error

Range ErrorRange Error

Anahlyzes the input signal’s Luma(Y’) and chroma information(C’) and if the input signal exceeds the designated minimum value and maximum value, the pixel shall blink. This function is to help the user to easily find out any unwanted levels of signals and for a better exposure setting.

Time Code Display

Time Code Display

Displays the Timecode information on the screen.

Waveform/Vector Scope


Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

1:1 Pixel Mapping Modes for SD/HD

Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.



Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.

TDM-473W : 47” 방송, 포스트 프로덕션용 2D/3D 모니터
TDM-473W는 편광 안경 방식의 3D 모니터로 원편광(Circular Polarizer) 원리를 이용하여 Flicker가 전혀 없고 CrossTalk도 매우 적으며 3D 안경도 얇고 가벼워 장시간의 3D 작업에도 피로감이 최소화된 것이 특징입니다. TDM-473W는 높은 휘도와 178°의 광시야각을 제공하며 3D LUT을 사용하여 정확한 색을 재현합니다. 또한 2개의 SDI, HDMI 입력 단자를 장착, Picture by Picture기능, 1:1 pixel mapping, Fast 모드, Waveform, Vectorscope, Focus Assist등 다양한 전문가용 기능을 제공합니다.
Display Spec.
 Size  47"
 Resolution  1920 X 1080 (16 : 9)
 Pixe Pitch  0.542mm
 Color Depth  1.06B
 Viewing Angle  2D:178°(H) / 178°(V) 3D:178°(H) / 20°(V)
 Luminance  400cd/m2
 Contrast Ratio  3D : 1200:1
 Display Area  1039.7 (H) x 584.8 (V) mm
 2 X BNC  3G-SDI A/B Channel Input
 2 X HDMI  HDMI Input
 2 X BNC  3G-SDI Out
 Audio In  Embedded Audio/Analog Stereo (Phone Jack)
 Audio Out  Analog Stereo (Phone Jack), Internal Speaker(Stereo)
FPGA Functions
 1:1 Pixel Mapping Modes for SD/HD,  Audio Level Meter Display,  Blue Only,  Focus Assist,  H/V Delay,  Key Lock,  Marker,  Mono,  Range Error,  Time Code Display,  UMD,  Waveform/Vector
Closed Caption
 CC-608 ANC,  CC-608 LINE 21,  CC-708
 TVLogic Color Calibration Utility
Other Functions
 REMOTE   TVLogic’s specification
 USB   Firmware update by USB cable
 Ethernet   Ethernet Control support
  Carring Case,
TDM-473W : 47” 방송, 포스트 프로덕션용 2D/3D 모니터

- Main Body :
1122 x 675 x 103.3 (mm) / 44.17 x 26.57 x 4.1 (inch)
- With stand : 1122 x 728 x 255 (mm) / 44.17 x 28.66 x 10 (inch)
- Weight : 36kg / 79.3lbs

TDM-473W : 47” 방송, 포스트 프로덕션용 2D/3D 모니터
  Pronduct Brochure (1 Page)    -
  Manual   Download
  Leaflet   Download
  Total Brochure   Download