Menu +

A/S
Home > 모니터 > LVM Series : Multi-Format Monitors > LVM-212W

LVM-212W

  • LVM-212W
  • LVM-212W
  • LVM-212W

     

LVM-212W

Audio Level Meter Display

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Closed caption

Closed caption

Closed caption.

Blue Only / Mono

blue only

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Focus Assist

Focus AssistFocus Assist

Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

H/V Delay

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Key Lock

Locks the knob or key control.

Luma(Y') Zone Check

Luma(Y') Zone CheckLuma(Y') Zone CheckLuma(Y') Zone Check

Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.

Marker

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Range Error

Range ErrorRange Error

Anahlyzes the input signal’s Luma(Y’) and chroma information(C’) and if the input signal exceeds the designated minimum value and maximum value, the pixel shall blink. This function is to help the user to easily find out any unwanted levels of signals and for a better exposure setting.

Time Code Display

Time Code Display

Displays the Timecode information on the screen.

User Aspect

User AspectUser AspectUser Aspect

Adjusts the Width /Height display ratio.

Various Scan Modes

Various Scan ModesVarious Scan ModesVarious Scan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector Scope

Waveform/VectorWaveform/Vector

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

Zoom

ZoomZoom

Magnifies the input signal from 0% to 90%.

3G-SDI Level A/B

Supports 3G-SDI Level A/B input.

UMD

UMD

Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.

LVM-212W : 전문가들이 기다려오던 21인치 랙(Rack) 전용 모니터
LVM-212W는 방송국 조정실과 중계차의 비디오 월W( all)에 손 쉽게 설치가 가능한 이상적인 랙(Rack)마운트 모니터입니다. 슬림한 베젤을 채용하여 19인치 랙에 딱 맞게 디자인 되었으 며 광시야각을 가진 Full HD 해상도의 LCD 패널과 티브이로직 의 뛰어난 비디오 프로세싱 기술을 결합하여 정확한 색감을 재 현한다. 또한 3G-SDI를 포함한 다양한 입력신호 지원과 UMD, Closed Caprion, Waveform, Vectorscope, Focus Atssist와 같은 많은 전문가용 기능을 제공한다.
Display Spec.
 Size  21.5"
 Resolution  1920 X 1080 (16 : 9)
 Pixe Pitch  0.2475mm
 Color Depth  16.7M
 Viewing Angle  178°(H) / 178°(V)
 Luminance  365cd/m2
 Contrast Ratio  1000:1
 Display Area  475(H) x 267(V) mm
Input
 1 X BNC  Analog Input (Composite)
 3 X BNC  Analog Input (Component)
 2 X BNC  3G-SDI A/B Channel Input
 1 X HDMI  HDMI Input
 1 X DVI  DVI Input
Output
 1 X BNC  Analog Output (Composite)
 3 X BNC  Analog Output (Component)
 1 X BNC  3G-SDI A/B Channel Out
Audio
 Audio In  Embedded Audio/Analog Stereo (Phone Jack)
 Audio Out  Analog Stereo (Phone Jack), Internal Speaker(Mono)
FPGA Functions
,  3G-SDI Level A/B,  Audio Level Meter Display,  Blue Only,  Focus Assist,  H/V Delay,  Key Lock,  Luma(Y') Zone Check,  Marker,  Mono,  Range Error,  Time Code Display,  UMD,  User Aspect,  Various Scan Modes,  Waveform/Vector,  Zoom
Closed Caption
 CC-608 ANC,  CC-608 LINE 21,  CC-708,  OP42,  OP47
Calibration
 TVLogic Color Calibration Utility
Other Functions
 REMOTE   TVLogic’s specification
 USB   AUTO Calibration   Firmware update by USB cable   Firmware update by USB memory stick
 Ethernet   Ethernet Control support
 Conversion   SDI-to-SDI,
Options
  Carring Case,  Rack Mount Kit(Single),
LVM-212W : 전문가들이 기다려오던 21인치 랙(Rack) 전용 모니터



- Main Body :
520 x 309 x 78 (mm) / 20.47 x 12.17 x 3.07 (inch)
- With stand : 567.2 x 336 x 142 (mm) / 22.33 x 13.41 x 5.59 (inch)
- Weight : 7.8kg / 17.16lbs


LVM-212W : 전문가들이 기다려오던 21인치 랙(Rack) 전용 모니터
  Pronduct Brochure (1 Page)   Download
  Manual   Download
  Leaflet    -
  Total Brochure   Download