Menu +

Home > 모니터 > 2K/HD Monitors > LHM-420A


  • LHM-420A



Blue Only / Mono

blue only

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

H/V Delay

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

User Aspect

User AspectUser AspectUser Aspect

Adjusts the Width /Height display ratio.

Various Scan Modes

Various Scan ModesVarious Scan ModesVarious Scan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

LHM-420A : 멀티뷰어 시스템에 적합한 FHD 멀티포맷 모니터
LHM 시리즈는 멀티 뷰어와 DID(Digital Inofrmation Display) 어플리케이션을 위한 경제적인 솔루션을 제공하며 LVM 시리즈와 같은 탁월한 패널 품질에 티브이로직 고유의 기술이 더해져 다양한 전문 모니터링에 적합한 제품입니다.
Display Spec.
 Size  42"
 Resolution  1920 X 1080 (16 : 9)
 Pixe Pitch  0.461mm
 Color Depth  1.07B
 Viewing Angle  178°(H) / 178°(V)
 Luminance  450cd/m2
 Contrast Ratio  3000:1
 Display Area  886(H) x 498(V) mm
 1 X BNC  HD SDI A Channel Input
 1 X HDMI  HDMI Input
 1 X DVI  DVI Input
 Audio Out  -
FPGA Functions
Closed Caption
Other Functions
  Carring Case,
LHM-420A : 멀티뷰어 시스템에 적합한 FHD 멀티포맷 모니터

LHM-420A : 멀티뷰어 시스템에 적합한 FHD 멀티포맷 모니터
  Pronduct Brochure (1 Page)   Download
  Manual   Download
  Leaflet    -
  Total Brochure   Download