Menu +

A/S
Home > 모니터 > LQM Series : Quad-split Monitors > TDM-243W

TDM-243W

  • TDM-243W
  • TDM-243W

     



Audio Level Meter Display

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Closed caption

Closed caption

Closed caption.

Blue Only / Mono

blue only

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Focus Assist

Focus AssistFocus Assist

Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

H/V Delay

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Key Lock

Locks the knob or key control.

Marker

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Range Error

Range ErrorRange Error

Anahlyzes the input signal’s Luma(Y’) and chroma information(C’) and if the input signal exceeds the designated minimum value and maximum value, the pixel shall blink. This function is to help the user to easily find out any unwanted levels of signals and for a better exposure setting.

Time Code Display

Time Code Display

Displays the Timecode information on the screen.

User Aspect

User AspectUser AspectUser Aspect

Adjusts the Width /Height display ratio.

Various Scan Modes

Various Scan ModesVarious Scan ModesVarious Scan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector Scope

Waveform/VectorWaveform/Vector

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

1:1 Pixel Mapping Modes for SD/HD

Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

UMD

UMD

Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.

TDM-243W : 24” 방송, 포스트 프로덕션용 2D/3D 모니터
TDM-243W는 마이크로 편광 필터를 LCD 패널 위에 부착하여 가볍고 편리한 원편광 3D안경을 이용하여 플리커 현상이 전혀 없는 편안하고 깨끗한 3D 영상을 제공합니다. 방송, 중계차, 프로덕션, 포스트 프로덕션용 3D영상 편집 및 모니터링을 위해 고안된 TDM-243W는 다양한 SD, HD 디지털 신호와 아날로그 비디오 포맷을 지원하며 Waveform, Vectorscope, UMD, 708/608 Closed Caption decoding, Timecode, Marker, Picture-by-Picture 모드, Horizontal Flip, On-Screen Audio Level Meter 등 다양한 기능을 제공합니다.
Display Spec.
 Size  24"
 Resolution  1920 X 1200 (16 : 10)
 Pixe Pitch  0.270mm
 Color Depth  1.07B
 Viewing Angle  2D:178°(H) / 178°(V) 3D:178°(H) / 20°(V)
 Luminance  400cd/m2
 Contrast Ratio  1000:1
 Display Area  518(H) x 324(V) mm
Input
 2 X BNC  3G-SDI A/B Channel Input
 2 X HDMI  HDMI Input
Output
 2 X BNC  3G-SDI Out
Audio
 Audio In  Embedded Audio/Analog Stereo (Phone Jack)
 Audio Out  Analog Stereo (Phone Jack), Internal Speaker(Stereo)
FPGA Functions
 1:1 Pixel Mapping Modes for SD/HD,  Audio Level Meter Display,  Blue Only,  Focus Assist,  H/V Delay,  Key Lock,  Marker,  Mono,  Range Error,  Time Code Display,  UMD,  Various Scan Modes,  Waveform/Vector
Closed Caption
 CC-608 ANC,  CC-608 LINE 21,  CC-708
Calibration
 TVLogic Color Calibration Utility
Other Functions
 REMOTE   GPI (RJ45)
 REMOTE   TVLogic’s specification
 USB   Firmware update by USB cable
 Ethernet   Ethernet Control support
 Conversion   SDI-to-SDI,
Options
  Carring Case,  Rack Mount Kit(Single),
TDM-243W : 24” 방송, 포스트 프로덕션용 2D/3D 모니터

552.5 x 389 x 98.5 (mm) / 21.75 x 15.31 x 3.87 (inch)

586 x 417 x 150 (mm) / 23.07 x 16.41 x 5.90 (inch)

10.8kg / 23.8lbs

   
TDM-243W : 24” 방송, 포스트 프로덕션용 2D/3D 모니터
  Pronduct Brochure (1 Page)    -
  Manual   Download
  Leaflet   Download
  Total Brochure   Download